|
|
COFDM IP Wireless Range
The IPM2 range of COFDM radio transceivers offers unrivalled ease of deployment, AES-128/256bit security and operates in point to point, point to multipoint and repeater modes automatically. These products currently support L-Band operation and can be programmed to cover frequencies 1100MHz to 1400MHz. Other frequency bands are also available on request, subject to minimum order quantities.
These units are ideal for use in professional digital video surveillance applications, including tranmission of high definition over distances of >1km Line of Sight (LoS). The use of COFDM modulation also makes IPM2 especially suitable for use in Non LoS situations. |
|
|
| IPM2 - COFDM OEM Module |
|
| Intelligent self contained module |
|
| Suitable for integration into customer's enclosure |
| 4 operator selectable frequencies
500mW Adjustable with power control 20Mb/s real throughput |
|
|
| IPM2 - COFDM horizon Portable Unit |
| With or without internal rechargeable battery |
|
4 operator selectable frequencies
500mW Adjustable with power control | 20Mb/s real throughput |
|
|
| IPM2 - COFDM IP67 Outdoor Unit |
|
802.3af/at Power Over Ethernet (PoE)
Visual and audible RSSI
N Type RF connector |
|
4 operator selectable frequencies
500mW Adjustable with power control |
20Mb/s real throughput
Pole mountable | |
|
|
IPLM-10 - OFDM Wireless Bridge  DS-IPM1V0-0A.pdf |
|
Up to 20Mb/s real throughput
Rechargeable Battery
Point to Multipoint
Encryption
QOS
NOTE: THIS UNIT HAS BEEN SUPERCEDED BY THE IPM2 RANGE | |
Dual Downconverters
We offer dual downconverters which are currently available in L-Band and S-Band. These are very small modules which can be used in COFDM video equipment with diversity receivers. |
 |
| DDC2V0 L-Band Dual Downconverter |
|
|
16 pre-programmed channels to select from
16dB Gain |
|
|
Compatible with other radios
Direct or Phatom dc feed option |
| |
 |
| DDC4V0 S-Band Dual Downconverter |
|
|
16 pre-programmed channels to select from
16dB Gain |
|
|
Compatible with other radios
Direct or Phantom dc feed option |
| |
Linear Power Amplifiers
Our range of linear power amplifiers use the latest InGap/GaAs HBT devices to ensure smallest size and maximum efficiency whilst maintaining superior performance. These are ideal for build-in for COFDM video equipment. |
 |
| LPA9V0 1W COFDM S-Band Power Amplifier |
| The latest addition to our LPA range |
+30dBm Ave into 50 Ohms (<-45dB WCDMA ACPR @5MHz offset)
10 to 14V dc Input on board SEPIC with current limit
Over-temperature protection
Harmonic filter on output
Very small size (57 x 35 x 6.5mm) | |
 |
| LPA8V0 1W COFDM UHF and L-Band Power Amplifier |
+30dBm Ave into 50 Ohms (<-45dB WCDMA ACPR @5MHz offset)
11dB L-Band gain typical
10 to 14V dc input |
|
Harmonic filter on output
| |
 |
|
LPA2V0 250mW COFDM UHF and L-Band Power Amplifier |
|
+24dBm (Ave) into 50 Ohms with <-45dB adjacent channel power (5MHz offset) |
|
10 to 14V dc input on board switcher
|
|
LNA and Driver Modules
Our extensive range of Low Noise Amplifiers and Driver Amplifiers are ideal for laboratory and OEM use, where very high performance is essential. These modules incorporate a small plate for heat-sinking and mounting if required. |
|
|
| LNA1 - Single Stage Low Noise Amplifiers |
|
Models from 525MHz to 3.6GHz
Very low noise
High linearity |
| 6V to 12V dc operation with phantom feed optional | |
|
|
|
| LNA2 - Two Stage Low Noise Amplifiers |
|
Models from 380MHz to 3.8GHz
High gain, low noise
High linearity |
| 6V to 12V dc operation with phantom feed optional | |
|
|
|
LDA1 - Single Stage Driver Amplifiers
Models from 50MHz to 2.7GHz
Very high linearity
6V to 12V dc operation with phantom feed optional
|
|
|
|
GBA1 - Single Stage Gain Block Amplifiers
Models from 60MHz to 2.17GHz
Hi linearity
6V to 12V dc operation with phantom feed optional |
|
|
|
|
|
|
©2010 adaptiveRF |
|
|
Products
